Trying to reach Gemini 3 from China can fail at several different points: the service may not be available for your location or account, the browser may not be using Clash, a routing rule may send the request to the wrong policy, or DNS and the selected proxy server may be unreliable. Changing nodes repeatedly without identifying the failure point can make troubleshooting slower.
This guide uses Clash-compatible clients, including Clash Verge Rev and other clients powered by Mihomo. The same basic checks apply elsewhere, although menu names and available controls differ. A proxy can change the network route used by an application; it does not guarantee that Gemini 3 is available in a particular region, satisfy account requirements, or resolve restrictions imposed by the service. Check the provider’s current regional availability, terms, and account requirements before troubleshooting the client.
The practical sequence is: confirm that the subscription works, verify that the browser’s traffic reaches Clash, check the matched rule and proxy group, then test DNS and another server. Keep one variable at a time so that a change in behavior points to a specific cause.
Access Gemini 3 From China With Clash: Setup and Fixes
Check service and account requirements first
Before editing YAML, confirm that the Gemini page or feature you are trying to use is available to your account and region. A page that loads but displays an eligibility message is different from a network timeout. Similarly, an account sign-in prompt, verification step, or access-denied page is not evidence that Clash failed to connect. Network routing cannot change account eligibility or guarantee access to a feature that the service does not offer to that account.
Use the exact Gemini 3 entry point provided by the service, and note what happens after opening it. Useful observations include whether the page never loads, whether a sign-in page appears, whether a model selector is missing, or whether an error appears only after submitting a prompt. These outcomes occur at different stages. A failed initial page request points toward connectivity, DNS, or routing; a page that loads but refuses an account may involve service-side availability or account requirements.
Also make sure the test is repeatable. Close old tabs, open a private window if appropriate, and test one request at a time. Browser extensions, cached sessions, custom DNS settings, and a previously established connection can make one browser behave differently from another. Do not disable account security measures or share passwords, verification codes, or subscription credentials while seeking help.
Import and verify your Clash subscription
Use a subscription from a provider you trust and follow its terms. In a Clash Verge Rev-style client, the usual sequence is to open the profile or subscription area, add the subscription URL, save it, and update the profile. Other clients may label these controls Profiles, Subscriptions, or Remote Configurations. Use the provider’s complete subscription URL, not the name displayed in the client. A local profile name is only a label and cannot retrieve node information.
After the update completes, check that the profile is active and that the client has loaded proxy nodes and groups. An update error, an empty node list, or an expired subscription must be resolved before testing Gemini. Confirm that the system clock is reasonably accurate, that the subscription address was copied without spaces, and that the network can reach the provider’s subscription host. If the provider offers a separate configuration format for Mihomo, select the format intended for the core bundled with your client.
Before changing any settings, note the current configuration name, active core, and listening ports. Subscription-generated profiles may be replaced during an update. If you need a custom rule, use the client’s supported merge, override, or rule-prepend feature rather than editing a generated file that may be overwritten. Do not paste a private subscription URL into public forums or screenshots; it can act like a credential.
Once the profile is active, check the client’s proxy group or node-selection page. A group may offer choices such as automatic selection, a latency test, or a manually selected server. If the group is empty, or the selected group points to a missing node, traffic will not reach a usable proxy even if the subscription itself updated successfully. Select one available server for an initial test rather than changing several group settings at once.
- Profile status: confirm that the intended subscription is active and its last update succeeded.
- Node availability: verify that at least one node appears and that the selected group has a valid member.
- Core status: make sure the Mihomo or other supported core is running without configuration-load errors.
- Local ports: check the actual HTTP, SOCKS, or mixed port shown in the client; do not assume it is always 7890.
Route Gemini traffic through the right policy
Clash routing normally works in a chain: the browser connects through a system proxy, a local proxy port, or a TUN interface; the core evaluates the connection against rules; and the matched rule sends it to a proxy group, a specific node, a direct connection, or another defined policy. A working node alone does not prove that a particular website is using it. The rule and the selected group both matter.
For a first test, use the client’s global proxy mode if it offers one and if you understand that it can route much more traffic than the Gemini site. If the page works in global mode but not in rule mode, the proxy server is probably reachable and the next place to inspect is the rule selection. Return to rule mode after testing. Global mode is a diagnostic comparison, not necessarily the best permanent setting, because it may route unrelated services through the same server.
In rule mode, open the connection or traffic log while loading the Gemini page. Find the new requests and inspect the destination domain, matched rule, policy group, and selected node. Client interfaces use different labels, but the useful question is consistent: did the request enter this Clash instance, and where did the core send it? If requests do not appear at all, inspect the browser proxy settings, the operating-system system-proxy switch, any browser extension, and whether another proxy application is active.
If the request appears but is marked DIRECT, the active rules did not send that connection to the intended proxy group. If it is assigned to a group but fails on one node, test another available node and inspect the log for connection errors. If the request uses the expected node and the page still fails, check DNS, server reachability, and account or service messages rather than assuming the rule is wrong.
Some setups allow a user rule to be placed before provider rules. A rule such as the following is only a conceptual example: it works only if the named policy group already exists, the core supports the rule format, and the client actually applies the custom rule ahead of conflicting rules.
rules:
- DOMAIN-SUFFIX,gemini.google.com,AI-Proxy
- MATCH,Default
Here, AI-Proxy and Default are illustrative policy names, not built-in group names. Replace them with names that exist in the active configuration. Do not append a rule blindly to the bottom of a long list: Clash evaluates rules in order, so an earlier broad rule can match first. A service may also contact more than one domain for sign-in, page resources, or API requests. Avoid copying an unverified, oversized list of domains from a random source; inspect the connection log and use the configuration mechanism supported by your client.
Check browser proxy, DNS, and TUN settings
System proxy and TUN are different ways of delivering traffic to the Clash core. A system-proxy switch configures the operating system’s proxy settings for applications that honor them. Some command-line programs and applications ignore those settings. TUN creates a virtual network interface and can capture more traffic, but it requires additional operating-system permissions and can interact with other VPN software, security products, or network filters.
Start with the least complicated method that fits your setup. For a browser test, enable the client’s system proxy and confirm that the browser uses the operating-system proxy rather than a separate extension or manually configured endpoint. Check the local port displayed by the client if the browser has a manual proxy setting. A mixed port can accept both HTTP and SOCKS connections in supported cores, but a port configured for only one protocol should not be entered as the other protocol.
If the browser does not use the system proxy, or the connection log remains empty, inspect browser-specific settings and extensions. Temporarily disable duplicate proxy extensions, built-in VPN features, and other proxy clients for the test. On desktop systems, also check whether another application is already controlling the system proxy. Avoid running two clients that attempt to bind the same local port; a conflict can prevent the core from starting or make the browser connect to the wrong process.
Use TUN only when ordinary system-proxy routing is insufficient or when you need to route applications that do not honor system settings. Enable it through the client interface so the required permissions and routes can be configured correctly. If connectivity becomes worse after enabling TUN, turn it off for comparison and inspect the client log, system permission prompts, and conflicts with other VPNs. TUN does not fix an unavailable account or a rule that selects the wrong policy.
DNS problems can look like proxy failures. A domain may fail to resolve before a connection is sent, resolve to an unexpected address, or be resolved by a component outside the intended route. First compare whether other sites load, whether the Gemini domain appears in Clash’s connection log, and whether the log reports a DNS or connection error. Do not change multiple DNS fields at once, especially in a subscription profile that may replace local edits during its next update.
If the client provides a DNS test or a supported DNS mode, change only one setting at a time and retest the same domain. Keep the original value so you can revert it. DNS behavior depends on the core, operating system, configuration, and network; a setting that works on one device may not be appropriate on another. When troubleshooting a managed profile, prefer the client’s override controls and check that the core accepts the resulting configuration.
Troubleshoot common Gemini connection failures
Use the visible symptom and Clash’s connection log together. The following checks are designed to narrow down the cause without repeatedly changing unrelated settings:
- The page times out and no request appears in Clash: the browser may bypass the active client, use a different proxy, or reuse a connection. Confirm the system-proxy state, disable duplicate proxy extensions for the test, then open a fresh browser session.
- The request appears as
DIRECT: check rule order and the active rule mode. Confirm that the custom rule is loaded before broader matching rules and that it names an existing policy group. - The request uses the intended group but fails: try a different available node, one at a time. Check for connection timeouts or DNS errors in the log, and verify that the selected node is not expired or unavailable.
- The page loads but sign-in or a feature fails: check the account and service message separately from the network path. A successful page load does not establish that the account or feature is eligible.
- Only some page elements or requests fail: inspect the individual connections in the log. A main page and its supporting requests may match different rules, so changing only the main domain’s policy may not explain every failure.
- Every application loses connectivity after enabling TUN: disable TUN for comparison, review permission and route errors, and check for another VPN or network filter. Restore a working baseline before attempting another change.
- The profile will not update or nodes disappear: distinguish subscription retrieval from proxy use. Verify the subscription URL and provider status, then update the profile and confirm the active configuration contains nodes and groups.
For a controlled test, record the current mode, selected group, node, and result. Then make one change—for example, select a different node—and repeat the same request. If the result changes, the node or its route may be relevant. If nothing changes and the log shows the same policy, investigate the rule or browser path instead. When testing is complete, restore the routing mode and settings you intend to use.
When asking a client community or provider for help, share the client and core versions, operating system, error text, and a redacted log excerpt. Remove subscription URLs, account identifiers, tokens, passwords, and any private server details. A screenshot of a successful browser page is less useful than a log entry showing the domain, matched rule, and error type.
Frequently asked questions
Does Clash guarantee access to Gemini 3 from China?
No. Clash controls network routing for applications that use it, but it cannot guarantee regional availability, account eligibility, or access to a particular feature. Check the service’s current requirements and distinguish an account or availability notice from a network timeout.
Why does Gemini open, but a request or sign-in still fail?
The page, sign-in flow, and model request may involve separate connections. Inspect the Clash connection log for each failing request and confirm its rule and policy. If the network path is working but the service reports an account or feature restriction, investigate the service requirement rather than changing nodes repeatedly.
Should I use global mode, rule mode, or TUN?
Global mode can help compare a proxy route with rule-based routing, but it may send unrelated traffic through the proxy. Rule mode offers more selective routing when the rules are correct. TUN captures traffic that may ignore the system proxy, but needs permissions and can conflict with other network tools. Choose based on the applications you need to route.
What should I check if my browser works but Clash shows no connection?
The browser may be using an extension, built-in proxy, or another client instead of the active Clash instance. For a controlled test, disable duplicate proxy settings, enable the intended system proxy, open a fresh session, and watch the connection log while loading the page.