Clash Verge Rev Windows 10 Install Guide for Beginners
Prepare Windows 10 before installing Clash Verge Rev
Clash Verge Rev is a graphical desktop client for Clash-compatible proxy configurations. It provides controls for importing profiles, selecting proxy groups, enabling the Windows system proxy, viewing connection logs, and using features supported by its bundled or configured Mihomo core. The application interface is only one part of the system: the core handles connections and rule matching, the profile supplies nodes and rules, and Windows determines whether other programs follow the local proxy setting.
Before downloading an installer, check the Windows 10 edition, system architecture, and whether another proxy application is already running. Most modern Windows 10 computers use an x64 processor. You can confirm this by opening Settings → System → About and checking System type. A computer marked “64-bit operating system, x64-based processor” should use an x64 installer. ARM64 packages are intended for Windows devices with ARM processors and should not be selected simply because the package name looks newer.
| Item | What to verify | Why it matters |
|---|---|---|
| Windows version | Windows 10 is fully updated and can install desktop applications | Older system components may cause startup or certificate errors |
| Architecture | x64 for most Intel and AMD computers; ARM64 only for ARM hardware | The wrong package may refuse to install or fail to start |
| Existing clients | Quit other Clash clients, VPNs, and proxy tools temporarily | Two applications may compete for the same ports or system proxy |
| Subscription access | Keep the subscription URL or exported YAML configuration available | The client cannot create working nodes without profile data |
It is also useful to write down the local ports used by any existing client. A common HTTP or mixed proxy port is 7890, but this is not a universal default. If another process already occupies the selected port, Clash Verge Rev may start while applications still cannot connect. Keeping only one proxy client active during the first setup makes later troubleshooting much easier.
Choose the correct Clash Verge Rev installer
Clash Verge Rev distributions may be offered in more than one Windows format. An installer package is usually the simplest option for beginners because it creates shortcuts, registers the application normally, and places program files in a predictable location. A portable package can be useful when you do not want a traditional installation, but it may require more manual attention to its data directory, updates, permissions, and shortcut creation.
For a typical Windows 10 desktop or laptop, select the Windows x64 installer. Do not choose a Linux package, a macOS package, or an ARM64 build based only on the file name. If Windows reports that the application is incompatible, return to the architecture check rather than repeatedly launching the same file. On a managed work computer, installation may also be blocked by organization policy; in that case, an administrator may need to approve the application.
Checks to perform before opening the file
- Confirm that the file name identifies Windows and the correct architecture.
- Check the file extension and avoid launching an archive containing an unexpected executable.
- Open the file’s Properties panel and review the publisher or digital signature when one is available.
- Keep Windows Security enabled and allow it to scan the downloaded file.
- Do not install multiple builds of Clash Verge Rev in different folders unless you have a specific reason.
Windows SmartScreen may display a warning such as “Windows protected your PC” when an installer has a low reputation or is not recognized. This message does not prove that the file is malicious, but it also should not be ignored automatically. First confirm the download source, package name, architecture, and file size. If those checks are consistent and you intentionally obtained the installer from a trustworthy distribution channel, select More info and review the publisher before deciding whether to continue.
Windows Defender or another security product may also quarantine a file that contains a network component. Proxy clients need to open local listening ports and may request firewall access, so security software can be more cautious than it is with an ordinary text editor. Do not disable protection globally. Instead, read the detection message, verify the package, and use an approved exception process only when the file is known to be legitimate.
Install the application and complete first launch
Close other proxy applications before starting the installation. If another client has enabled the Windows system proxy, disable it or note its settings first. This prevents an old client from silently taking control of the same proxy switch after Clash Verge Rev starts. You do not normally need to uninstall the old client immediately; keeping it available can help you recover a configuration if something was not backed up.
Double-click the installer and follow the displayed steps. The default installation directory is normally sufficient. Avoid placing the program inside a cloud-synchronized folder, a temporary download directory, or a path that is frequently cleaned by system maintenance tools. If the installer asks whether to create a desktop or Start menu shortcut, enable the option that matches your preference. A shortcut does not affect proxy behavior; it only changes how the application is launched.
On the first launch, Windows Firewall may ask whether the application should communicate on private or public networks. For a beginner using Clash Verge Rev only on the same computer, private network access is usually the more limited choice. Public network access should not be enabled casually. If you intend to share the proxy with other devices, that is a separate LAN configuration requiring an explicit review of allow-lan, bind addresses, firewall rules, authentication, and the security of the local network.
When the main window appears, allow the client a moment to initialize its core. Look for a status indicator, runtime message, or log entry showing that the core started successfully. If the window opens but no profile can be selected, that is expected before a configuration has been imported. If the client closes immediately, records a core startup failure, or shows a configuration parsing error, do not enable TUN yet. First resolve the profile or runtime problem.
Import a subscription and verify the active profile
A newly installed client has no useful route until it receives a configuration. Most users import a subscription URL provided by their proxy service. A subscription URL is not the same as a web page URL: it usually returns YAML or another Clash-compatible configuration when requested by the client. Treat this address as sensitive account information because anyone who obtains it may be able to retrieve your node data or consume the service quota.
Open the profile or subscription management area in Clash Verge Rev, choose the option to add a remote profile, paste the subscription URL, and give it a clear local name. Then start the download or update operation. The exact menu label can vary between releases, but the workflow remains the same: add the URL, fetch the configuration, select the downloaded profile, and activate it. If your provider supplies a converted Clash or Mihomo link, use that format rather than pasting a generic VPN configuration into a Clash profile field.
Validate the profile before routing traffic
After the download finishes, select the profile and inspect its basic contents. A usable configuration normally contains proxy definitions or proxy providers, proxy groups, and rules. It may also define a mixed-port, socks-port, DNS settings, or an external controller. Do not assume that every subscription includes the same fields. The absence of a local port in the downloaded YAML may be normal when the desktop client supplies that runtime value separately.
mixed-port: 7890
allow-lan: false
mode: rule
log-level: info
proxies:
- name: "Example Node"
type: example
server: example.invalid
port: 443
proxy-groups:
- name: "Proxy"
type: select
proxies:
- "Example Node"
- DIRECT
The snippet above is only a structural illustration and is not a working server configuration. Never replace your provider’s complete profile with a shortened example. Pay particular attention to YAML indentation, duplicate names, and references from proxy groups to node names. A profile can download successfully but still fail to start if it contains unsupported fields, malformed YAML, or a proxy group referring to an item that no longer exists.
Enable the Windows proxy and select a route
Once the profile is active and the core is running, open the proxy or dashboard section. Choose a proxy group and select a node, an automatic latency option, or DIRECT according to the group’s purpose. A node test may show latency to a test endpoint, but a low number does not guarantee that every website or application will work. The final result depends on the rule matched by each destination and on the protocol supported by that node.
For ordinary Windows applications, enable the client’s system proxy switch. This writes or controls the Windows proxy settings used by programs that respect the operating system configuration. Confirm the actual local port shown by the client before testing. If the client uses a mixed port of 7890, an HTTP or SOCKS-aware application may be configured to use 127.0.0.1:7890, but you should always follow the values displayed by the active client rather than copying a common example.
System proxy mode does not automatically capture every application. Some games, command-line tools, desktop launchers, and applications with their own network stack ignore Windows proxy settings. Browsers may also use an extension, a manually configured proxy, or a secure DNS mechanism that makes their behavior different from other programs. Test one application at a time and confirm the request in the Clash connection log.
When to consider TUN mode
TUN mode creates a virtual network interface and can capture traffic from programs that do not understand HTTP or SOCKS proxy settings. It generally requires administrator approval and may interact with Windows firewall rules, antivirus software, IPv6 behavior, DNS settings, and other VPN drivers. It is not a required step for a first installation. Start with the system proxy, confirm that the basic path works, and enable TUN only when you have a clear reason.
When TUN is enabled, do not leave another VPN or traffic interception driver active unless you understand how the two products interact. Multiple virtual adapters can create routing loops, DNS conflicts, or a connection that appears to start but cannot reach any destination. If TUN fails, turn it off, restart the client, and return to the simpler system proxy path before changing several settings at once.
Test the installation with logs and local ports
A successful installation has three separate signs: the Clash Verge Rev window remains open, the configured core reports that it is running, and a test application creates a connection visible in the client’s log. Checking only the tray icon is not enough. A client can remain open while the core has stopped, while the active profile has no usable proxy, or while Windows is still using another application’s proxy settings.
- Open the active profile and confirm that the intended proxy group is selected.
- Check the dashboard for the current HTTP, SOCKS, or mixed port.
- Enable the system proxy switch in Clash Verge Rev.
- Open a new browser window and visit a site that was not already cached.
- Return to the connection log and identify the domain, matched rule, proxy group, and selected node.
- Disable the system proxy and repeat the test only if you need to compare the two paths.
If the browser works but no connection appears in the Clash log, the browser may be using an extension, a separate VPN, or a previously established connection. If the connection appears with a DIRECT action, the rule did not send it through a proxy group; inspect rule order and the group selection. If the log shows a failed connection to the node, changing the Windows proxy switch will not repair the remote server, credential, DNS, or protocol problem.
You can also test the local listener from PowerShell. Replace 7890 with the port shown in the client:
Test-NetConnection 127.0.0.1 -Port 7890
A successful TCP test only proves that a program is listening on that local port. It does not prove that the profile contains a working node or that the destination will match the expected rule. For an HTTP proxy test, use an application that supports proxy parameters and specify the correct protocol and port. A SOCKS-only port cannot be tested as if it were an HTTP port.
Fix common Windows 10 installation and startup warnings
“Windows protected your PC” or an unknown publisher warning
Review the source, signature, architecture, and file name first. If the publisher is missing or unexpected, stop and obtain a verified package instead of forcing the launch. Reputation warnings are especially important when the file was received through an untrusted mirror or a shortened download link. Never enter your subscription URL into an unknown installer or configuration manager.
The client starts, but the proxy port is unavailable
Another Clash client, VPN, development tool, or background service may already be using the port. Change the port in the supported client settings or stop the conflicting process, then restart Clash Verge Rev. Avoid editing a subscription-generated file directly if the client will overwrite it during the next update. Check the active port after every profile switch because some clients apply runtime values separately from the YAML file.
The system proxy is enabled, but applications connect directly
Confirm that Windows has the expected proxy enabled and that the address is local, commonly 127.0.0.1, with the port shown by the client. Then check whether the application supports system proxy settings. If it does not, configure its own HTTP or SOCKS proxy fields, or evaluate TUN mode after the basic setup has been verified. Also close and reopen the application because some programs read proxy settings only during startup.
The profile downloads but the core will not start
Read the first error in the runtime log rather than the last cascade of messages. Typical causes include invalid YAML indentation, duplicate keys, unsupported configuration fields, an empty proxy provider, or a proxy group that references a missing name. Update the profile from the provider, compare it with the client’s supported core, and remove only settings that you understand. If a provider recently changed its format, report the exact error and client/core versions to the provider.
Clash Verge Rev Windows 10 installation FAQ
Do I need to enable TUN mode during installation?
No. TUN mode is optional and is not required for the Windows system proxy. Begin with the system proxy and enable TUN later only when an application ignores HTTP or SOCKS settings. TUN may require administrator approval and can conflict with other VPN drivers.
Which local port should I enter in a browser or terminal?
Use the HTTP, SOCKS, or mixed port displayed by the running client. Do not assume that every installation uses 7890. An HTTP proxy setting and a SOCKS5 setting are not interchangeable, so match the application’s protocol field to the selected port.
Can I reuse a configuration from another Clash client?
Often, yes, when the file uses supported Clash or Mihomo sections such as proxies, proxy-groups, and rules. Back up the original file first. Client-specific caches, controller settings, TUN drivers, and local data directories should not be copied blindly.
Why does one website work while another one fails?
Different domains can match different rules, proxy groups, DNS paths, and destination protocols. Inspect each request in the connection log, check whether it was routed through DIRECT or a proxy, and test the selected node separately before changing the entire configuration.